Building Tall Bar Tables

Oct 13th

Tall bar tables for a small kitchen, instead of adding a large dining table, you can build a bar table that can serve as an eating table. A bar table can also be placed in a corner of a family room for entertaining guests. With a little elbow grease, some household tools and a couple of pieces work you can complete this project in less than a week for those with basic carpentry skills, or at least a couple of days for those with advanced carpentry skills. Find the place in the home where you place your bar table. Take into account the shape of the room and the bar location, whether it will be placed in a corner or placed against the wall. Also take into account the number of bar stools you want to add and the space for people sitting and standing around.

Wooden Tall Bar Tables
Wooden Tall Bar Tables

Instructions

15 Photos Gallery of: Building Tall Bar Tables

Image of: Wooden Tall Bar Tables
Image of: Vintage Tall Bar Tables
Image of: Unique Tall Bar Tables
Image of: System Tall Bar Tables
Image of: Steel Tall Bar Tables
Image of: Square Tall Bar Tables
Image of: Simple Tall Bar Tables
Image of: Round Tall Bar Tables
Image of: Narrow Tall Bar Tables
Image of: Modern Tall Bar Tables
Image of: Interest Tall Bar Tables
Image of: Dark Tall Bar Tables
Image of: Custom Tall Bar Tables
Image of: Black Tall Bar Tables
Image of: Amazing Tall Bar Tables
 

Measure the surface of the place you chose. From this you will base how big a bar you will build. You want it to be in proportion to the size of the room. For an average size room, you can build a 6 foot long bar table, for a smaller room to build a bar that is 4 meters long. Draw a design of the tall bar tables you plan to build, or download available plans bar from the Internet. If you want a simple design with a bar top and four legs, you can sketch a drawing like a photo or a picture of this step. This simple design shows a total height of 4.25 meters, with a barrier height of 5 feet and counter depth of 2 meters. The four legs are each 4 meters high.

Collect all the material needed. Put the plywood on the floor, with the bottom upward. Attach wood contacts or 4 “x 4” post anchor to the bottom of the plywood. Place them about 3 inches away from each corner of the plywood. Make sure the screws are tightened. Connect the legs by turning them on the mail or timber contacts. Drill holes for the screws to penetrate the wood better, and then use a screwdriver to screw a 2-inch screw to hold each side. Turn the tall bar tables up, and then check to see if it’s level by placing one level at the top of the table in both directions.